Details

Laticrete Adhesive & Sealant 20 oz. Sausage Pack

Fast curing, hybrid elastomeric adhesive and sealant from Laticrete International meets all requirements in today's green building standards while still holding that strong adhesion for a wide variety of substrates like all HYDRO BAN products and accessories

Features

  • Excellent adhesion on nearly all substrates including polystyrene
  • Fast curing
  • Excellent durability
  • Superior flexibility
  • Will not shrink or crack
  • No harmful components used
  • VOC compliant
  • Allow for flood testing in 2 hours at 70 degrees or higher and 50% RH

Uses

  • Holds backer-board to HYDRO BAN pre-slopped shower pans
  • Fasten niches to wall studs and back-board
  • Adhesive sets in place all cover seams, coves, corners, screw and tab washer penetrations with full coverage

Coverage

  • Coverage will vary depending on joint size adn width
  • Approximately 25 lineal feet (7.62 m) per tube at 1/4" x 1/4" (6 x 6 mm) joint width
  • Approximately 49 lineal feet (14.9 m) per sausage pack at 1⁄4” x 1⁄4” (6x6 mm) joint width

Laticrete Hydro Ban Adhesive & Sealant

Application Temperature Range35°F - 80°F (2°C - 27°C)
Open Time20–30 minutes
Set Time2 hours
Full Cure40 hours
Clean UpSoapy water
Mildew ResistanceGood
Dimensions36 in x 29 in x 20 in


Ratings & Reviews

Be the first to write a review