Laticrete StoneTech Salt Resistant Water-Based Sealer

Features and Benefits
  • High performance protection against salt water damage
  • For natural stone and masonry surfaces around salt water pools
  • Protection against water-based stains
  • Preserves natural look
  • Easy-to-use, water-based formula
Where to Use
  • Porous tile, natural stone, concrete pavers, terracotta, and grout
  • Best suited for porous substrates. If used on poured concrete, slight darkening or enhancement of the surface may occur
Directions for Use
  • Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, dry and free of waxes and coatings
  • Surface temperature should be between 35°F and 90°F. Keep children and pets out of the area until foot traffic resumes
  • Mask any surfaces not intended to be treated
  • Liberally apply an even coat with a bristle paint brush or paint roller
  • Allow sealer to penetrate the surface for 15–20 minutes
  • During this time, distribute excess sealer over entire area to ensure even penetration
  • Do not allow sealer to pool on the surface
  • Thoroughly wipe the entire surface with a clean dry cloth to completely remove all excess sealer from the surface
  • The sealer should be fully cured prior to water contacting the surface
  • Full cure is achieved in 72 hours. If there is a possibility of rain within the 72 hour cure time, cover surface so it remains dry
  • Clean tools used during application with water
  • If resistance to oily stains is also desired, apply StoneTech® Professional BulletProof® Sealer after Salt Water Resistant Sealer has fully cured.
Available Sizes and Coverage
  • Gallon: 315-475 sq ft.
  • 5 Gallon: 1,575-2,375 sq ft.

Ratings & Reviews

Be the first to write a review