The circular heating plate is 5'' in diameter.
Tile Saw Bucket Water Heater
Enjoy 10% Savings On This Product During Our Monthly Special!
Immersion water heaters for wet tile saws, buckets, pails, sinks and small tanks keep your hands warm when the weather gets cold!
Water Heater Features
- Quality heater made in the USA.
- GFCI adapter recommended.
- Heats 1 gallon of water to 90°F in 10 minutes.
- The 5" heater is small and compact and fits in the water pans of most wet tile saws.
- The 10-1/2" heater works best in buckets, pails, and other larger containers.
- If not submerged in water, these heaters automatically shut-off.
- Insulated handle for safe handling.
- Just insert water heater and remove when desired temperature is reached.
- Heaters have an internal protector that disconnects power in 2 to 3 minutes if the heater is operated outside of water.
- Made in the USA.
- Cord length: 5-1/2 ft.
- Base height: 1-1/4".
- Minimum liquid level: 1-1/2".
- Element material is Incoloy, the outer housing is aluminium.
- UL listed.
Please note that these tile saw water heaters are not intended to heat more than 5 gallons of water
Question & Answers
The height of the heating ring is 1''.
No, this tile saw water heater does not have a temperature control function.
Ratings & Reviews
Most Helpful Reviews
My water feature was in danger of freezing up completely, despite a small birdbath heater I use to keep the water from freezing. During a cold snap, the water was nearly stopped and pumps were not happy. I set this heater in a large pool of moving water, and it heated the entire water feature (around 60 gallons) to 40 - 50 degrees. The "handle" part never got very warm, but the immersed part glowed red hot. As things heated up, my water feature returned to the roaring waterfall it once was with added steam! Nice long cord, easy to use, recommended.
I'm one of those car obsessed people who hand wash my car even during the winter months. I bought and use this heater to warm up the bucket of wash. It's very fast at heating up 4 gallons of water to a nice temperature for washing a car. This is my second one, as the first started tripping the breaker after using it for 3 years or so. I don't consider blaming fault with the product though, as I was not following the guidelines fully over the years. I recommend the heater to friends and family, and would not hesitate to buy another if this one ever fails.
I like this heater. I am a tile who moved cross country And it gets cold here. Help me keep going in cold weather
IT HEATS UP VERY FAST, AND MAINTAINS THE TEMPERATURE.
Great water heater. Keeps my 100 gal tank hot.
Its great anywhere its cold and you work with water. The hands appreciate the warm water.
The heater on my 500-gallon hot tub takes it up to 40 degrees C (104 degrees F), and I was hoping to use this heater to boost it up another few degrees, but it only increases the temperature of a gallon of water by about 8 degrees C in a minute, which means it takes about an hour to raise my tub's temperature 1 degree C --- and in that time, it cools off by about 1 degree, so it's only able to maintain the temperature, not raise it. It's well built and works as advertised, but ... I guess I should have done the math before I bought it.
Very easy to use and fits in the water pan. I've used it in cold temps, around 5 to 10 degrees and it worked great. No complaints here!
This thing works great. It will take a tray full of water that is 50 degrees on warm it up over 100 in no time. By putting it right in the tray the water actually works like radiator for your whole saw. No more wet hands freezing to the tray, no more frozen water lines if you've been away for 10 mins. My only wish is that they made a slightly smaller version for my small wet saw. It tends to get in the way of the tray on my small saw.
Great item for cold weather tile cutting especially when working outdoors. Heats up fast and maintains great water temp. No cold hands.