If you want to get the most out of your chainsaw, it’s important that you choose the saw chain that is exactly right. Here are a few things to keep in mind.
Choosing the right chainsaw chain: A few tips
If you want to get the most out of your chainsaw, it’s important that you choose the saw chain that is exactly right. Here are a few things to keep in mind.
When choosing a chainsaw chain, you first need to know the pitch, the gauge and the number of drive links. Once you have these, everything else about the choice is basically about what you prefer.
Pitch is the average distance between two rivets on the saw chain. Its value (1/4"", .325"", 3/8"" or .404"") is commonly displayed on the guide bar. If you can not find it, our best advice is to let your dealer measure your old chainsaw chain, as this is a bit tricky to do.
Gauge is the thickness of the drive links, and it is important to know this in order to make the chainsaw chain fit correctly into the guide bar. The gauge (.043"", .050"", .058"", or .063"") is, like the pitch, probably displayed on the guide bar. If not, we recommend you to let your dealer measure the gauge on your old saw chain.
The length of a chainsaw chain is determined by the pitch and the number of drive links. This is normally not printed anywhere on the bar or elsewhere on the product, so the links on the old saw chain need to be counted.
Matching teeth and muscles
Putting a more aggressive saw chain on a standard chainsaw will never give you a better performance. It is like putting shark teeth on a piranha – the bite will not get any better.
If you make sure that your saw chain and saw match each other perfectly (aggressive saw chain for an aggressive saw, and so on), your cutting equipment will always deliver its maximum performance.
Full chisel, semi-chisel, chipper
There are three basic designs of the cutters on modern saw chains: the full chisel, the semi-chisel, and the chipper.
The sharp corner of the full chisel cutters split wood fibers easily and provides the fastest, most efficient cutting in clean softwood.
The corner of the cutters on a semi-chisel saw chain are slightly rounded. This helps the cutter keep its sharpness longer, especially when cutting hard or frozen wood, or when working in dirty surroundings, where a full chisel saw chain would quickly lose its sharpness. The chipper saw chain is similar to the semi-chisel saw chain, but with an even rounder working corner.
To find a saw chain that exactly matches your chainsaw, please use the Husqvarna saw chain guide for reference.
Dont Forget Safety!
First published by our friends at Husqvarna
"