TEC Multipurpose Primer 1 Gallon

TEC Multipurpose Primer - 1 Gallon

TEC Multipurpose Primer is an acrylic latex-based primer for TEC brand self-leveling underlayments. It may also be used to enable the bonding of other TEC brand surface preparation products and latex-modified thin-set mortars to difficult substrates. For peel-and-stick tile installation, primer can be used on dry, porous concrete, gypsum cement underlayments, and plywood. It may also be used to promote bonds over cold-rolled steel substrates

Features

• Enables installation of ceramic tile or natural stone directly to metal, gypsum-based underlayments, glazed tile (without scarifying), and well-bonded epoxy coatings
• They are easily applied with a brush or roller for non-porous surfaces or a push broom for porous surfaces.
• Multipurpose primer for all approved porous and non-porous substrates
• Typically dries in 30 minutes to 3 hours under ideal ambient conditions.
• Remove all surface contaminants such as oil, grease, floor finishes, wax, and dirt.
• Do not apply over wet areas.
• Solvent-free
• DO NOT FREEZE. TEC Multipurpose Primer must be stored in an unopened container in a cool, dry location out of direct sunlight and protected from weather.
• Maximum of 1 year from date of manufacture in unopened package.
• Read complete cautionary information printed on the product container before use.

Suitable Properly Prepared Substrates

• Concrete
• Cementitious Back Units
• Cold rolled steel
• adhesive residue (except tacky or pressure-sensitive adhesive)
• Existing VCT, LVT, or non-cushioned sheet goods
• Exterior grade plywood, APA grade trademarked exterior plywood