Alpha Tools ESC-150 6" Electric Wet/Dry Stone Cutter
Shipping & Delivery
Shipping & Delivery
- $13.95 Flat Rate shipping for orders under $500 (Other options at checkout)
- Same-day shipping cut-off time for ground orders for CD stock items is 3:00 PM ET
- Same-day shipping cut-off time for expedited orders for CD stock items is 12:00 PM ET
- Shipping time is calculated by business days. Weekends do not count.
- For Freight Items See Policy Here
Alpha Tools ESC-150 6" Electric Stone Cutter
Alpha introduces a new electric stone cutter called the ESC-150, which is equipped with a powerful motor capable of cutting 1-1/4" (3cm) stone slabs in one pass. It is capable of miter cutting of 1-1/4" (3cm) materials with ease so that any stone fabricator can use it when miter cuts are required, without the time-consuming setup. The flexibility of the hose helps reduce operator fatigue and improves the operation. The Alpha ESC-150 has a built-in dust gate, making it dustless when connected to a HEPA vacuum. It can utilize a variety of consumables, including the Alpha Katana 6" for porcelain panels and slabs, Hot-Rod 4" for 1/4" steel rods, and 1/8" fiberglass rods. A Libero 5" blade is recommended for marble applications since most marble slabs are 3/4" (2cm) thick or less.
Features
- Powerful motor for use on granite, quartz surfaces, marble, limestone, concrete, and sintered/porcelain slabs
- Capable of miter cuts 1-1/4" (3 cm) material with ease
- Kink-free water hose for easy maneuverability and reducing operator fatigue
- Great for sink-hole cutting, groove cutting/rodding
- Comes with a built-in dust gate for dustless cutting when connected to a HEPA vacuum
- Blades sold separately
What's Included?
- Alpha Tools ESC-150 6" Electric Stone Cutter
- Dust Cover
- Ground Fault Circuit Interrupter
- Easy On-Easy Off Sleeve
- Water Hose (15ft/4.5m)
- Water quick coupler with shut-off valve
- Hex wrench
- Additional Hardware
- Operator's Manual
Alpha ESC-150 6" Stone Cutter Specifications | |
Power | 11.2 amps (1,200 W) |
Voltage | 110V/220V |
No Load Speed | 10,000 RPM |
Arbor | 7/8 in |
Blade Capacity | 6 in |
Max Cutting Depth | 2" (50.88 mm) |
Weight | 11.30 lbs. |