Alpha Vetro Glass Tile Diamond Blade

10 inch saw blade was the worse glass blade I’ve used Upside down right side up it doesn’t matter I tried using the plunge cut and run it through a few times to cut and still the glass shattered I would use this blade again for free. 3rd generation in the tile business

Glass blade cut well. Used it on 1/16” glass tile backsplash. Customer service from contractors direct was excellent. Blade I originally ordered was out of stock for 3-4 weeks. He suggested this blade and got it to me in 2 days regular shipping

so far great blade and im working with a high dollar glass tile

I have to believe there is a better blade out there. I bought this blade because it is suggested to be the best. The blade did cut the glass tile unbelievable until the tiles get pulled into the blade and brake. We tried to go extremely slow but every other cut got pulled into the blade. We used a dressing stone but that did not seem to help. When the tile did go thru it was a great cut but expect an extremely slow process. I'll keep looking for a better blade.

I am a professional installer. This blade performs very well. With a glass blade you must accept the fact that it will cut very slow and need to be dressed often. This blade made flawless diagonal chip free cuts in 3x6 glass subway tile when cut face down as recommended on blade label. You must buy a dressing stone!!! If you do not buy a stone you will complain that the blade stopped working and seems to have went bad after 10 or 20 cuts. This is your fault. Use a dressing stone. I used the gold one. I dress my blade no more than every ten cuts. Glass tends to smear on the blade and clog the diamonds so you must use a dressing stone often to keep the blade and cutting smooth. You must have very good water flow directly at the point of cut to keep the glass from overheating while cutting.