BN Products Mortar & Grout Mixing Paddles

BN Products Mortar and Grout Mixing Paddles

The BN products mixing paddles are designed to mix all sticky and viscous materials such as tile adhesives, ready-mixed mortar, ready-mixed plaster, grout, screed, filler, thin set, cement plaster, pointing mortar, etc.

BNR001-120 and BNR001-140

• Available in 120 mm (4.75") and 140 mm (5.5"), the overall length is 24 inches. It is designed for plasters, adhesive mortars, mortars, tile adhesives, and fillers, and it is best for sticky and viscous materials. Connection M14 x 2 male threads.

BNR002-57

• Diameter 57 mm (2.25"), overall length 13.5 inches. They are designed for paints, lacquers, thin coatings, and ready-mix plaster. Use on BN6169 or drill. Connection 5/16 inch hex shank.

BNR003-120, BNR003-140, and BNR003-160

• Available in 120 mm (4.75"), 140 mm (5.5"), or 160 mm (6.25"), with an overall length of 24 inches. It is best for heavy and high-viscosity materials and is designed for concrete, mortars, plasters, heat-insulating plasters, and epoxy resin with sand. Connection M14 x 2 male threads.

BNR004-120 and BNR004-140

• Available in 120 mm (4.75") or 140 mm (5.50"), the overall length is 24 inches. It is designed for thin-set tile adhesive, grout, adhesive mortars, ready-mix mortars, pointing mortars, and fillers. It is best for small volumes on high-speed mixers. The connection is M14 x 2 male threads.

BNR005-120

• The diameter is 120 mm (4.75"), and the overall length is 24 inches. It is designed for plasters, adhesive mortars, tile adhesives, and fillers, and it is best for sticky and viscous materials. The connection is M14 x 2 male threads.

BNR008-120K

• Diameter 120 mm (4.75"), overall length 24 inches. Designed for concrete, cement, mortars, and grouts with aggregate less than 3/8 inch diameter. Also, for gypsum lime plaster, fibrated aluminum roof coatings, and paints. Sold in pairs for the double mixer. Connection 13 mm or ½ inch Hex Shank for BN6402A mixer.

BNR009-120 and BNR009-140

• Available in 120 mm (4.75") or 140 mm (5.50"), the overall length is 24 inches. It is designed for fillers, bitumen coatings, joint cement, epoxy-resin compounds, and grouting compounds. It is best to prevent lump formation and lessen the amount of air in the mixture. Connection M14 x 2 male threads.

BNR010-120 and BNR010-140

• Available in 120 mm (4.75") or 140 mm (5.50"), overall length 24 inches. They are designed for gypsum-lime plaster, fibrated aluminum roof coatings, and paints. This paddle can be disassembled in two pieces and fit into a carrying case. Connection M14 x 2 male threads.