Abrasive Technology Diamond Products Foam Hand Pads

Abrasive Technology Foam Diamond Hand Pads

Features

• Electroplated pad uses nickel plating technology to hold each individual diamond in place
• Available in 70, 120, 220, 400 and 600 grits
• 800, 1800 and 3500 grits are resin bonded
• Diamond hand-pads work great on marble, glass, concrete hand polishing, glass kiln, petrified wood, ceramic, granite Tile, Quartz, Travertine, Terrazzo, artificial stone, natural stone hand polishing sanding & honing
• Their ideal hand size allows for easy finishing on bull-nosed shapes and areas that are hard to reach with power tools
• Foam block size is 2-1/4" x 4"

Directions for Use

• Just don't expect the work to go as quickly as with a wet belt sander or flat lap. Working with hand pads is usually time consuming, but it also affords a feel and an intimacy with the glass that's not usually possible with more elaborate tools
• As with most grinding and polishing operations, a typical job calls for using a succession of grits, from coarse to fine
• Diamond hand pads are color coded
• Rough grinding and polishing work often starts with a 70 grit, then proceeds to 120, 220, and 400
• Usually 600 grit is about as fine as people use with hand pads on glass; this won't leave a highly polished surface, but it will leave a nice satin sheen
• Regardless of the grit you're using, be very cautious if you're working close to areas that you don't want to work with the hand pads
• The pads will quickly scratch shiny surfaces
• Perfect for abrading glass, fiberglass and composites
• Invaluable for seaming and edging