I’m doing a 36" x 36" shower stall. Is it best to cut the 36" x 48" prefab pan on-site or is it recommended to have the custom pan made to those dimensions instead?

Either method will work. The Hydro Ban Shower Pans are fully waterproof. You would need to treat the cut edges with Hydro Ban Waterproofing Membrane . You can also create a customer pan here . Custom pans have a 2-3 week lead time and are non-returnable and non-refundable.

Would i need to add inside corners for pan to wall board or only sealant?

This is dependent on the wallboard you are going to use. If you are using laticretes hydro-ban board they recommend following the installation instructions for that product or calling them at 800 243-4788.

What is the Part number for the drain for this pan?

You will only require the drain grate with this item. The Grates are SKU-- 3860 - CLICK HERE

When using a 2' x 4' pre-sloped extension added to one end of a pre-sloped shower pan, do I need to use a membrane w/thinset to cover the seam or will using their adhesive & sealant in the rabbit be sufficient?

You can stick with the adhesive & sealant. You do not need the membrane with thinset for this situation.

are these sloped pans for use w curbless showers,also?

Yes, you can create a hydro ban barrier free shower using the hydro ban center drain Pre-Sloped Shower Pan and Pre-Sloped Ramp. The combination of these hydro ban shower system products along with hydro ban liquid applied waterproofing membrane, thin-set and grout provide a zero entry shower that is ADA compliant. Please see the video below.

Can this be used in basement with concrete floor?

Yes, concrete floors are a suitable substrate for the shower pans.

The 36x48 inch pan with the curb: does the curb add on a couple inches to the overall size? For example, if the area I have for the pan is exactly 36X48, will the curb increase the width of the pan to more than 36 inches?

The curb adds an additional 3" on every size water pan. Example-- 36"X48" pan will make the overall demensions to 39"X48".

What should I use to "glue" the tile to this product?

You could use any modified or unmodified thinset Laticrete does recommend using their thinset for warranty purposes.

Can two 48 x 48 center drain pans be connected and use extensions at both ends to reach the inside length? Or, what would a custom pan, to the aforementioned dimensions, cost?

If you have two drains in place or the ability to alter the plumbing to accommodate each pan drain, you can install a shower with your described configuration. You can order a custom pan with the exact dimensions and drain placement. Fill out the custom pan form and submit so we can obtain pricing for you. Lead time is generally 2-4 weeks for custom pans from Laticrete.

Laticrete Hydro Ban Shower Pan | Contractors Direct

Name: Laticrete Hydro Ban Pre-sloped Shower Pan
Brand: Laticrete
SKU: 3156-36x60 Center PVC
Price: 651.17 USD
Availability: InStock

Laticrete Hydro Ban Pre-sloped Shower Pan

Constructed of lightweight, high-density, expanded polystyrene, the Laticrete Hydro Ban Pre-Sloped Shower Pan is 100% waterproof and includes a factory-installed drain/waste line connection. This tileable shower pan is easy to install and is an extreme time saver compared to the conventional shower mud pan method.

Features

Pre-sloped ready-to-tile Pan eliminates the need for traditional mud bed installations
Lightweight and durable. Easy to transport and handle during installation
Freight shipping is required for all 60'' pans to minimize handling
Code-approved waterproofing meets ANSI A118.10 requirements
Factory-installed drain assembly
Can quickly and easily be modified to size on-site
Code approved, Meets IAPMO-PS- 46
Component of Laticrete Lifetime Warrant - Single source responsibility
Works in conjunction with Laticrete tile and stone installation materials
It comes with a curb and one 10oz tube of Hydro Ban Adhesive
Only fits the Laticrete Hydro Ban 4" x 4" Grates - Sold separately

Available Sizes

36" x 60" PVC or ABS Center Drain
36" x 48" PVC or ABS Center Drain
48" x 60" PVC or ABS Center Drain
48" x 48" PVC or ABS Center Drain
38" x 66" PVC or ABS Off Center Drain
Each unit comes with a curb and one tube of Hydro Ban Adhesive and Sealant
Stainless steel grate is now sold separately

What's Included?

Shower Pan with drain (grate sold separately)
Curb (5 ft L x 3.75 in H x 3.5 in W)

Custom Size Shower Pans Available

Order a custom-sized shower pan to fit your specific shower size. Simply print and fill out the HYDROBAN Pre-Sloped Custom Shower Pan Form with the dimensions of your custom shower, and then submit the form via email to orders@contractorsdirect.com. We will send the information to Laticrete and get you the best pricing for your custom shower pan.

***All Custom Shower Pans are Non-Returnable - Non-Refundable***

Common Questions

What is a suitable substrate for a pre-slopped shower pan?

Suitable substrates are Cement Backer Board, Concrete, Exterior Glue Plywood, Oriented Strand Board (OSB)

Should you pre-slope a shower pan?

Pre-sloping involves creating a slight slope in the subfloor or the shower base before installing the waterproofing and tile. This slope is designed to direct water towards the shower drain and prevent water from pooling or seeping into areas where it shouldn't, such as the surrounding floor or walls.

Manual

Additional Info

Laticrete Hydro Ban Pre-sloped Shower Pan

Shipping & Delivery

Laticrete Hydro Ban Pre-sloped Shower Pan

Features

Available Sizes

What's Included?

Custom Size Shower Pans Available

Common Questions

What is a suitable substrate for a pre-slopped shower pan?

Should you pre-slope a shower pan?

Customer Reviews

Your cart

Laticrete Hydro Ban Pre-sloped Shower Pan

Choose options