Husqvarna K2500 16" Hydraulic Concrete Cutter

Husqvarna K2500 16" Hydraulic Powered Cutter

The K2500 is an easy-to-use hydraulic power cutter that is also very light. It complements the K3600, delivering the capacity for demanding jobs that call for high power. This model has a 16" (400 mm) cutting disc, offering a considerable cutting depth for demanding jobs.

The K2500 lets you work efficiently and comfortably for long spells. Its freedom from exhaust gases and low noise level make it especially suitable for jobs indoors. It is robust, reliable, and requires minimal service.

The hydraulic motor is inside the main tool casing and drives the cutting disc via a belt. The distance and weight distribution between handles have been optimized for every normal working position. This makes it easy to guide and operate the cutter precisely and without undue exertion.

Features

• Free shipping from the factory warehouse
• Wet or dry cutting, blade sold separately

Suitable for

• Heavy concrete cutting
• Gas/water/ sewer maintenance
• Demolition work
• Indoor/Refurbishment work
• Prefab factory
• Mining maintenance

Technical Info

• Max. pressure rate: 2500 psi (140 bar)
• Max. flow rate: 10 gpm (40 l/min)
• It can be operated using any hydraulic system that meets the requirements of 10 gal/min and a maximum pressure of 2500 psi

General Info

Using the K2500 for pre-cutting

The K2500 hydraulic power cutter can be operated with the K3600 Ring cutter. The K2500 makes the initial cut to full depth, and the K3600 makes the finishing cut.

This method makes it easier to achieve a straight and perpendicular cut. Overall, the work is faster, and blade economy is improved.

Servo for motor speed control

The Husqvarna K2500 has a servo function for its hydraulic motor speed control for convenience and easy operation.

Reversible cutting arm

Reversing the cutting arm with just a few simple operations lets you get the blade as close to the wall or floor as possible.

Blade brake

The hydraulic motor has a patented braking valve, which is actuated when the cutter's speed control is released. The blade will then stop within seconds.