Laticrete Latapoxy 310 Stone Adhesive Mini Jar Unit Part A & B

Laticrete Latapoxy 310 Stone Adhesive Mini Jar Unit, Part A & B, S-310AB-NC-08, 2 x 1/2 liter

Two components are high-strength epoxy adhesives formulated for spot bonding fixing methods for tile and stone installations on vertical surfaces. The adhesive maintains its non-sag consistency at high temperatures up to 95°F (35°C).

Features

• Best speed and productivity over mechanical anchoring, plaster, and wire, and the thin-set method of veneer installation
• Easier to work with when compared to traditional methods; no drilling, cutting of kerfs, or setting of pins
• LATAPOXY 310 Stone Adhesive allows for quick, easy plumb adjustment while the stone is in place to compensate for uneven walls and stone thickness variations
• Permanent; it will not fail or deteriorate over time and is ICC and IBC-approved
• 1 liter - 2 parts - 2 x 1/2 liter
• Approximate Coverage per 10 Liter Unit: 300-325 ft2 (27-30 m²) at Plumb Wall (3 mm) with 1/8" Latapoxy Thickness (3 mm) *150-170 ft2 (14-16 m²) out 1/4" (6 mm) with 1/4" Latapoxy Thickness (6 mm). *75-80 ft2 (7-7.5 m²) out 1/2" (12 mm) with 1/2" Latapoxy Thickness (12 mm)

Uses

• Spot bonding marble, granite, and large format ceramic tile on walls and overheads, interior and exterior applications
• Adhesive for bonding masonry, precast concrete, and stone panels
• Ideal for fireplace surrounds, elevators, and stair risers
• Adhesive for bedding and fastening marble, granite, and other stone slabs on walls and wainscoting
• Adhesive for fabricating granite, marble, and other stone
• Approved by TCNA for Interior applications method W215 and W260

Advantages

• Fast Permanent Bond-45 minutes to 1 hour set time
• Easy to Use-1:1 mixing ratio by volume
• Non-Staining-ideal for white and light-colored? marbles, other stones, and tiles
• Withstands shock and vibration
• Durable Permanent Bond-will not deteriorate over time
• Safe-no solvents
• Non-Sag-when applied up to 1" (25 mm) thick
• Approved by the following building code bodies for exterior installations: ICC and IBC

Interior Substrates

• Concrete
• Concrete masonry units (CMU)
• Brick/masonry
• Exterior glue plywood
• Consult cement backer board manufacturer for specific installation recommendations
• Steel surface must be cleaned to remove oil, dust oxidation, and other bond-inhibiting materials

Exterior Substrates

• Please consult LATICRETE Technical Services at 800.243.4788, ext. 235, for approval prior to use for all exterior applications
• There is a maximum height restriction of 30 ft (9.1 m)
• For exterior installations outside of North America, contact the LATICRETE International Department at 1.800.243.4788, ext. 242

Concrete Application

• Must be a minimum 6" (150 mm) thick reinforced
• Must be a minimum 3500 psi (24 MPa)
• Must be a minimum of 28 days old prior to installation
• CMU
• Double wythe walls only