Porcelain Cyclone

Porcelain Cyclone - Tungsten Carbide-Tipped Multi-Purpose Masonry/Tile Bits

The Porcelain Cyclone was specifically designed for drilling quickly and efficiently through porcelain, masonry, and other hard surfaces for various applications. Its speed and durability distinguish it from other standard carbide masonry bits. With a specially formulated mix of metals and a superior-designed carbide tip, the Porcelain Cyclone makes installations quicker, easier, and more profitable.

Features

• Sold Individually
• Tungsten Carbide-Tipped, Multi-Purpose Masonry/Tile Drill Bit
• 3X Longer Life & 2X Faster than standard masonry/tile bits
• Drills 10+ holes per bit (based on PEI Class 5 porcelain tile with 1/4in Cyclone)
• Faster Drilling Times (average 30 sec/hole)
• Specifically designed for porcelain, masonry, and harder substrates
• Clean, precise holes
• Quick & easy startup, no wandering
• Recommended drilling speed of 600 rpm (hammer drills and handheld drills only)

Recommended For

• Porcelain Tile
• Ceramic Tile
• Marble
• Granite
• Concrete Block
• Brick
• Quartz
• Crystallized Glass

Applications

• Frameless Shower Doors
• Masonry
• Bathroom Partitions
• Bathroom Accessories
• Tiles

Instructions (for maximum durability)

• 1: DIP IN WATER before drilling and about every 5 seconds during drilling (more often when going through harder materials). We find dipping in water is more effective at cooling the Porcelain bits than spraying.
• 2: FIRM PRESSURE: Let the bit do the work—do not apply excessive pressure. Place the drill bit on the specified mark, apply pressure, listen for a slight CRUNCH, and start your drilling process. Drill straight into the hole, and do not wiggle the drill.
• 3: USE PROPER DRILLING SPEED: Cyclone: 600 rpms and slowed down while breaking through the hole.
• 4: The Cyclone can be used in a Handheld or Hammer Drill.
• 5: Do not use dull or damaged bits.
• 6: Wear ANSI-approved safety goggles and heavy-duty work gloves during use and when handling bit.