Porcelain Speedbit 6in Special Length

Porcelain Speedbit - 6" Special Length Bits

The Porcelain Speedbit is a tungsten carbide-tipped, spear-point glass/tile drill bit specifically designed for drilling quickly and efficiently through porcelain, glass, and other hard surfaces in a variety of applications.

Features

• Sold Individually
• 6-inch overall length
• Currently available in only 2 sizes
• Tungsten Carbide-Tipped, Spear Point Glass/Tile Drill Bit
• 3X Longer Life & 2X Faster than standard glass/tile bits
• Drills 10+ holes per bit (based on PEI class porcelain tile with 1/4in Speedbit)
• Internal test results show the Porcelain Speedbut drilled more than 3 times as many holes and more than twice as fast as most competitive bits
• Faster Drilling Times (average 30 sec/hole)
• Specifically designed for porcelain, glass, and harder substrates
• Can drill near edges of tiles/glass without cracking substrate
• Clean, precise holes
• Quick & easy startup, no wandering
• Recommended drilling speed of 2,300 rpm (handheld drills only)

Recommended For

• Porcelain Tile
• Ceramic Tile
• Marble
• Glass Tile
• Granite
• Concrete Block
• Brick
• Quartz
• Crystallized Glass

Applications

• Frameless Shower Doors
• Masonry
• Bathroom Partitions
• Glass / Decorative Glass
• Bathroom Accessories
• Mirrors
• Tiles

Instructions (for maximum durability)

• 1: DIP IN WATER before drilling and about every 5 seconds during drilling (more often when going through harder materials). We find dipping in water is more effective at cooling the Porcelain bits than spraying.
• 2: FIRM PRESSURE: Let the bit do the work—do not apply excessive pressure. Place the drill bit on the specified mark, apply pressure, listen for a slight CRUNCH, and start your drilling process. Drill straight into the hole, and do not wiggle the drill.
• 3: USE PROPER DRILLING SPEED: Speedbit: 2,300 rpms and slowed down while breaking through the hole. NOTE the higher speed for the Speedbit as most other spear point bits recommend slower speeds of 400-800 rpms.
• 4: Handheld Drills Only.
• 5: Do not use dull or damaged bits.
• 6: Wear ANSI-approved safety goggles and heavy-duty work gloves during use and when handling bit.