Profilitec FOILTEC Internal Corners - Set of 2

Profilitec FOILTEC Internal Corners - Set of 2

Internal corner junction in coupled preformed polyethylene.

Features

• Polyethylene insulating membrane coupled on two sides, compatible with tile adhesive.
• The internal corner is usually used to perfect the laying of the Waterstop Foiltec Roll membrane
• It is particularly suitable in shower stalls, preventing humidity from spreading to adjacent rooms
• Tested with vapor test proving high resistance, making it a great option for wet steam rooms
• The membrane's soft, highly elastic material also makes up for any slight movements between the support and the covering, preventing the spread of hazardous microorganisms
• FOILTEC membranes include a complete range of accessories to meet specific site requirements, ensuring state-of-the-art installations, contributing to a workmanlike laying

FOILTEC Product Installation

• STEP 1: Make sure the base is level, smooth, clean, and dry
• STEP 2: Use flexible adhesive, butyl tape, MS polymer adhesive, or waterproof glue to seal any overlaps between FOILTEC, its attachments, and any vulnerable regions.
• STEP 3: Before installation, trim the membrane to the proper length. Use a 10 cm overlap along floor-to-wall junctions and a 5 cm overlap in other membrane areas.
• STEP 4: With the proper tile adhesive and a trowel with a 3mm x 3mm notched edge, apply the waterproof membrane to the flooring.
• STEP 5: Using butyl tape, MS polymer adhesive, or waterproof glue, check and confirm that vital portions or corners are waterproofed.
• STEP 6: Using tile adhesive, lay the flooring tiles directly over the FOILTEC membrane.