Profilitec FOILTEC Waterproofing Membrane Rolls

Profilitec FOILTEC Waterproofing Membrane Rolls

Waterproof membrane made of laminated polyethylene designed for humid situations to be laid at the same time as the tile using the proper tile adhesive. Bacteria and dangerous chemicals are prevented from spreading by the membrane's soft and extremely elastic material, which compensates for slight movement between the substrate and tile covering.

Features

• Polyethylene insulating membrane coupled on two sides, compatible with tile adhesive.
• Supplied in 3'3" rolls of different length sizes: 16'5", 26-1/4', 33', and 98'5"
• It is particularly suitable in shower stalls, preventing humidity from spreading to adjacent rooms
• Tested with vapor test proving high resistance, making it a great option for wet steam rooms
• The membrane's soft, highly elastic material also makes up for any slight movements between the support and the covering, preventing the spread of hazardous microorganisms
• FOILTEC membranes include a complete range of accessories to meet specific site requirements, ensuring state-of-the-art installations, contributing to a workmanlike laying

FOILTEC Product Installation

• STEP 1: Make sure the base is level, smooth, clean, and dry
• STEP 2: Use flexible adhesive, butyl tape, MS polymer adhesive, or waterproof glue to seal any overlaps between FOILTEC, its attachments, and any vulnerable regions.
• STEP 3: Before installation, trim the membrane to the proper length. Use a 10 cm overlap along floor-to-wall junctions and a 5 cm overlap in other membrane areas.
• STEP 4: With the proper tile adhesive and a trowel with a 3mm x 3mm notched edge, apply the waterproof membrane to the flooring.
• STEP 5: Using butyl tape, MS polymer adhesive, or waterproof glue, check and confirm that vital portions or corners are waterproofed.
• STEP 6: Using tile adhesive, lay the flooring tiles directly over the FOILTEC membrane.