Profilitec LEVELTEC 3mm T Spacer for LEVELTEC System

Profilitec LEVELTEC 1/8" T Spacer for LEVELTEC System

T-tie-base is recommended for straight course lying, especially of the wood effect tiles.

Features

• "T" tie-base for joints 3 mm (1/8")
• The leveler does not require pliers or unscrew-drivers
• Easy positioning without screwing
• Automatic ejection of the thread
• 50% time saving compared to other systems
• Easy leveling adjustment with few degrees of rotation
• No need for further side action on the tiles, only a proper vertical pressure

How to Use Profilitec Tile Leveling System

• STEP 1: Below the floor or wall covering, place the Tie-base. Due to its reduced thickness and compact base, it does not interfere with the glue and establishes a joint of 1, 2, or 3 millimeters (per the UNI 11493 standard).
• STEP 2: Without screwing, insert the cap vertically until it hits the tile. With just one click, the installation time can be significantly reduced while fitting automatically in the thread.
• STEP 3: You can acquire the ideal alignment of the surface by rotating the tiles a few degrees to level them.
• STEP 4: When the glue is fully dry, remove the LEVELTEC and work on the cap. Take care to move in the joint's direction. The bottom of the threaded stick breaks, leaving nothing behind.
• STEP 5: Push down on the last thread to loosen the cap, allowing the thread to exit without having to unscrew. The cap can be used again for further applications.