Spin Doctor Tile Leveling System Caps

Spin Doctor Leveling System Caps - 100 Piece Box

The Spin Doctor leveling system is one of the market's fastest and most convenient tile leveling systems. The tile leveling caps feature a patented free-spinning design that allows the tile installer to spin the cap down the threaded spacer post with the least effort. Caps can be tightened using only one hand, freeing one hand to make any necessary adjustments to the tile during installation.

Features

• Sold in 100-piece boxes
• No tool required - Freely spin the leveling cap down to the tile surface in seconds using only two fingers
• Reusable caps - Leveling caps can be used job after job with no decrease in performance
• Better visibility - Caps have gaps so you can see the grout joint at the spacer

How to Use the RTC Spin Doctor System

• Set your tile in the desired position
• Position the spacers directly under the edge of the exposed tile - make sure there is direct contact between the threaded spacer posts and tile with no mortar in between
• If using the protective shields, slide the shield down the post until it meets the surface of the tile
• Put a free-spinning cap on the top of the threaded spacer post and spin the cap down to the tile surface
• Turn the cap until all adjacent tile surfaces are flush
• Remove the leveling caps and posts with a rubber mallet after the tile adhesive has cured
• Clean off caps with warm water and re-use

Additional Components Sold Separately

• Threaded spacers/posts sold separately
• Shields sold separately