Contractor Pricing
StoneTech Enhancer Pro Solvent-Based Sealer
$6017 USD
Unit price
/
Unavailable
Shipping calculated at checkout.
Brand: StoneTech
| SKU: 7359-1Pt.
| MPN:
Shipping & Delivery
Shipping & Delivery
- $13.95 Flat Rate shipping for orders under $500 (Other options at checkout)
- Same-day shipping cut-off time for ground orders for CD stock items is 3:00 PM ET
- Same-day shipping cut-off time for expedited orders for CD stock items is 12:00 PM ET
- Shipping time is calculated by business days. Weekends do not count.
- For Freight Items See Policy Here
StoneTech Enhancer Pro Sealer
For Professional Use Only
Features
- Enriches color
- Heavy-duty protection against most stains
- Solvent-based interior and exterior applications
Where to Use
- Natural stones such as limestone, slate, travertine, sandstone, flagstone, tumbled stone, flamed stone, textured stone, masonry, and concrete
Directions for Use
- Make sure the surface is clean, free of waxes, coatings, and previous sealers, and is dry for 24 to 72 hours
- Surface temperature should be between 50°F and 80°F
- Ensure that the area is well-ventilated during application and until the surface is dry
- Mask off any surfaces not intended to be treated
- Liberally apply an even coat using a paint pad, roller, brush, or pump-up garden sprayer
- Do not use a power sprayer, towel, or sponge for application
- Do not thin before using. See Method of Application for more instructions
- Allow sealer to penetrate the surface for 15–20 minutes. Denser material may require more time to penetrate
- DO NOT ALLOW EXCESS SEALER TO DRY ON SURFACE
- Failure to remove excess sealer from the surface may result in residue that may need to be mechanically removed
- Thoroughly wipe the surface with multiple dry cloths to remove all excess sealer
- A second coat may be needed for more absorbent surfaces
- If a darker appearance is required, sealer should be applied one hour after initial application, as directed in steps 2 through 4
- Complete cure is achieved after 24–72 hours
- Avoid foot traffic for 6–8 hours after application. If foot traffic must resume sooner, cover the floor with red rosin paper to protect it until a complete cure has been achieved
- Red rosin paper is not needed to apply a second coat
- Clean equipment with mineral spirits
- Rags and equipment that are wet with product may be flammable
- Clean up promptly after the job is complete
- Clean equipment with mineral spirits and allow to dry in a well-ventilated area
- Allow rags to dry in a well-ventilated area out of reach of children and pets
- When dry, dispose of in accordance with local waste disposal regulations
Method of Application
- For small jobs, use a paint pad, roller, or brush
- For larger jobs, use a pump-up garden sprayer available at your local garden center, hardware store, or home improvement center
- Do not use a power sprayer. Power sprayers create a significant amount of overspray, resulting in wasted product and the need for additional clean-up
- A pump-up garden sprayer will reduce the potential for over-exposure to vapors and produce better results
- Ensure that the area is well-ventilated during application and until the surface is dry to the touch