StoneTech Stone Enhancer and Sealer

StoneTech Stone, Masonry and Grout Enhancer and Sealer

Features

• Easier to use, water-based formula
• Enriches color
• Standard protection against most stains
• Interior use

Where to Use

• Natural stones such as limestone, slate, travertine, sandstone, flagstone, tumbled stone, flamed stone, textured stone, masonry, and grout

Directions

• Be sure all surfaces to be cleaned are swept or vacuumed to remove loose debris
• Ensure the work area is well-ventilated during application and until the surface is dry
• Shake well before using
• Apply product evenly and liberally using a paint pad, low-pressure chemical-resistant sprayer, roller, or brush. Avoid applying the product on unintended surfaces
• Allow product to penetrate the surface for 15–30 minutes; denser material may require maximum time for Enhancer to penetrate
• Keep surface wet with sealer, adding more product if needed to prevent dry spots for the entire penetration time
• Following penetration time, thoroughly wipe the surface clean and dry with absorbent towels
• DO NOT ALLOW EXCESS ENHANCER TO DRY COMPLETELY ON SURFACE
• A second coat may be needed for porous, absorbent surfaces or if a darker appearance is required
• Apply the second coat 1 hour after the first coat, following directions in steps 1 and 2
• A full cure is achieved after 24–72 hours; foot traffic may begin in 6–8 hours. If needed sooner, cover the floor with red rosin paper to protect it until the recommended periods have passed
• Clean tools used during application with water

Available Sizes and Coverage

• Quart: 20-65 sq ft
• Gallon: 75-250 sq ft
• 5 Gallon: 375-1,250 sq ft
• Expected Wear: 3-5 years