1
of
2
Contractor Pricing
Laticrete StoneTech Semi Gloss Finishing Sealer Water-Based
$2818 USD
Unit price
/
Unavailable
Shipping calculated at checkout.
Brand: StoneTech
| SKU: 7362-1 Qt.
| MPN:
Shipping & Delivery
Shipping & Delivery
- $13.95 Flat Rate shipping for orders under $500 (Other options at checkout)
- Same-day shipping cut-off time for ground orders for CD stock items is 3:00 PM ET
- Same-day shipping cut-off time for expedited orders for CD stock items is 12:00 PM ET
- Shipping time is calculated by business days. Weekends do not count.
- For Freight Items See Policy Here
StoneTech Semi-Gloss Water-Based Finishing Sealer
Features
- The two-in-one formula leaves an alight sheen and protects against stains
- Easy-to-use, water-based formula
- Interior use
Where to Use
- Slate, saltillo, limestone, travertine, and concrete floors
- Not intended for use on glazed, polished, or non-absorbing surfaces, wood floors, decks, showers, countertops, or near pool areas
Directions for Use
- Read the entire label before using it. Use only as directed
- Always test in a small, inconspicuous area to determine the appropriate application method, achievement of desired results, and to ensure good adhesion
- Ensure the work area is well-ventilated during application and until the surface is dry
- Avoid applying in direct sunlight
- The surface must be thoroughly clean, dry, and free of any sealers or coatings before application
- Application to a dirty or dusty surface will affect adhesion and appearance
- High Gloss Finishing Sealer should not be applied to a wet or moist surface. Avoid applying onto surfaces not intended for treatment. The sealer can be used for new installations 48 to 72 hours after grouting. Fresh concrete slabs require a minimum of 28 days to cure before applying the sealer
- Liberally apply 2 to 4 even coats with a natural bristle brush, roller, or paint pad applicator
- Do not apply the product with a sprayer or sponge. Avoid puddling of liquid during application
- Failure to apply a sufficient amount of sealer to the surface may result in an undesirable finish or degradation of the coating
- More coats may be applied if desired
- Allow 30 to 45 minutes between coats or until the surface is dry to the touch
- Surface traffic may begin 12 hours after final application; keep installation dry for a minimum of 12 hours; complete cure is achieved in 24 to 48 hours
- Keep surface clean and dry as finished surfaces may become slippery when wet
Available Sizes and Coverage
- Quart: 25-75 sq ft
- Gallon: 100-300 sq ft
- 5 Gallon: 500-1,500 sq ft
