USG Durock Brand Uncoupling Mat - 355 sq. ft. Roll

USG Durock Brand Uncoupling Mat - 355 sq. ft. Roll

A waterproof underlayment membrane helps suppress the transfer of lateral movement in a subfloor to preserve the integrity of the tile installation.

Features

• Roll size: 43" x 98' (1.1m x 30m)
• Provides uncoupling, waterproofing, and vapor management of the substrate
• Lighter, thinner alternative to 1/4" tile underlayment panels
• A low-density core helps keep the membrane flat during installation
• Rot-proof and resistant to solvents and alkalis
• Ceramic tile installation can take place immediately after the membrane is installed
• Approved for use with modified and unmodified mortars
• Uncoupling Mat is an LDPE film with a spun bond polypropylene non-woven fabric on the top side and a needle-punched polypropylene fleece on the bottom side

Applications

• In interior and exterior* applications for both residential and commercial floors
• To renovate older floors to address existing in-plane cracks in the subfloor
• To diminish the transfer of stresses beneath the flooring associated with expansion and contraction between different substrate materials
• To protect in-plane lateral movement in industry-approved plywood or oriented strand board (OSB) floors from transferring to the finished floor
• Accelerate construction timelines requires installing tile over green concrete slabs before the recommended 28-day cure

Suitable Substrates

• Concrete, lightweight concrete
• Tile backer boards such as USG Durock Brand Cement Board and Fiberock Brand Tile Backerboard
• Green concrete
• Exterior-grade plywood and APA Sturd-I-Floor, Exposure 1 OSB (interior use only)
• Gypsum underlayments such as USG Levelrock Brand
• Cement mortar beds, self-leveling underlayment, and leveling coats
• Properly prepared cement terrazzo (interior only)
• Radiant heat systems
• Properly prepared existing vinyl flooring such as VCT, LVT/LVP, and non-cushioned paper-backed/felt-backed sheet vinyl

Conforms to ANSI A118.10 American National Standard Specifications for Load Bearing, Bonded, Waterproof Membranes for Thin-Set Ceramic Tile and Dimensional Stone Installation and ANSI A118.12 American National Standard Specifications for Crack Isolation Membranes for ThinSet Ceramic Tile and Dimension Stone Installation