Raimondi Vite Leveling System 1/8" Straps

Raimondi Vite Leveling System 1/8" (3 mm) Straps

Raimondi VITE's cap and strap system makes lippage removal as easy as placing, setting, and spinning. The caps tighten, leveling themselves between spaces, which removes lippage.

Features

• Clips are placed between tiles in the adhesive, and caps are placed on top of the threads to be tightened
• Caps spin and tighten with just two fingers
• Grip points are established on caps spin until they reach the tile
• Tighten caps so it levels itself between spaces, which removes lippage
• Once the adhesive is set, simply remove caps by hitting with a rubber mallet or use the Clip Dozer
• Caps are specially designed with hollow spaces to see grout joints
• Suitable for both tile sides and intersections
• The VITE does not require any tools
• For tile thickness from 3 to 15 mm (1/8" - 19/32")

VITE Technical Data

• Minimum tile thickness: 1/8"
• Maximum tile thickness: 19/32"
• Minimum Grout joint: 1/8"

How to Use Raimondi Vite Tile Leveling System

• STEP 1: After spreading your tile adhesive, insert a leveling clip underneath the tiles along the 4 sides - use traditional spacers as you usually would to square up the corners. For larger tiles, it may be necessary to "double up," using 2 leveling spacers for each side
• STEP 2: Set the tile and beat it with a rubber mallet
• STEP 3: Spin the caps until tight. You will see the tile lift removing lippage
• STEP 4: Once the tile adhesive has been set, remove the VITE system with a rubber mallet or kick it out with your feet. Grout can be installed once all clips have been removed