Arc Inc. TANK/10 Waterproofing Compound

Arc Inc. TANK/10 Waterproofing Compound

TANK/10 Waterproofing is a ready-to-use liquid paste latex waterproofing and anti-fracture membrane formulated for use under commercial and residential tile and stone in interior and exterior applications. Due to its elastomeric properties, TANK/10 provides a continuous moisture barrier and reduces the risk of cracks transferring from substrate materials to hard surface flooring.

Features

• Forms a continuous, seamless waterproof membrane for protection of surfaces from moisture penetration
• Provides anti-fracture protection for tile and stone decorative coverings
• 3-year shelf life in unopened, unused, factory sealed, original container when stored in a dry area with temperatures between 40° and 110°
• TANK/10 will remain stable through two freeze-thaw cycles. Blend material with a mixing paddle after thawing — do not add water
• Dries in one to three hours, depending on humidity, airflow, and temperature (accelerate drying by running a dehumidifier or fans in the room)
• Tile or stone may be applied after TANK/10 achieves a noticeably darker shade of gray and feels dry to the touch
• Allow membrane to cure for a minimum of 12 hours before conducting water tests
• Coverage: 50-60 square feet per gallon for waterproofing (two-coat applications); 100-120 square feet per gallon for anti-fracture membrane only (one-coat applications)
• Apply with a paintbrush, paint roller, or trowel
• Allow each full coat to dry completely before applying another coat
• It is best to apply each coat with strokes that are perpendicular to the prior coat to ensure 100% coverage
• Clean up with warm water and soap while the compound remains wet
• Modified thin-set mortar recommended for tile and stone installations on top of compound

Surface Preparation

• Surfaces must be structurally sound, clean, dry, and free of contaminants
• Use an appropriate solvent to remove silicone, oil, and other contaminants
• Remove dust and debris with a damp sponge and wipe dry with a cloth
• Substrates must be completely dry when applying waterproofing
• Fill voids with latex caulk (do not use silicone) or thin-set mortar
• Apply TANK/10 when the surface temperature of the substrate is between 34° and 105°
• Before coating smooth or glossy surfaces, scarify with 100 grit sandpaper

Suitable Substrates

• Cementitious backer board
• Concrete (except sealed concrete)
• Gypcrete
• Existing ceramic tile and stone
• Block or brick masonry
• Interior and exterior plywood
• Mortar beds
• Gypsum wallboard
• OSB - Oriented Strand Board (interior applications only)
• Plaster (interior applications only)
• PVC
• Stainless Steel

Typical Areas of Use

• Showers
• Steam showers
• Spas
• Tub surrounds
• Wet rooms
• Swimming pools
• Hot tubs
• Water features
• Terraces
• Balconies